Hey there! As a supplier of DAIHATSU glow plugs, I've seen my fair share of issues with these little but crucial components. Glow plugs are super important in diesel engines, especially in cold weather. They heat up the combustion chamber to help the engine start smoothly. But like any other part, DAIHATSU glow plugs can fail. Let's take a look at some of the common failures you might run into.
1. Overheating
One of the most common problems with DAIHATSU glow plugs is overheating. When a glow plug overheats, it can cause the tip to melt or break. This usually happens when the glow plug is left on for too long or if there's an issue with the electrical system.
The electrical system is responsible for providing the right amount of power to the glow plug. If there's a short - circuit or a problem with the relay, the glow plug might get too much power. This extra power causes the temperature to rise beyond what the glow plug can handle, leading to overheating.
For example, if the relay that controls the glow plug stays closed for an extended period, the glow plug will keep getting power and heat up continuously. Once the tip of the glow plug melts, it won't be able to heat the combustion chamber effectively, and the engine will have trouble starting.
2. Carbon Deposits
Carbon deposits are another big headache for DAIHATSU glow plugs. Over time, as the engine runs, carbon particles can build up on the surface of the glow plug. These deposits act as an insulator, preventing the glow plug from transferring heat efficiently.
When carbon builds up on the tip of the glow plug, it can reduce the temperature of the tip. This means that the combustion chamber won't get heated enough, making it difficult for the engine to start, especially in cold weather.
There are a few reasons why carbon deposits form. Poor fuel quality is one of them. If the diesel fuel contains a lot of impurities, it will burn less cleanly, leading to more carbon deposits. Also, short - trips where the engine doesn't reach its optimal operating temperature can contribute to carbon build - up. The engine doesn't get hot enough to burn off the carbon, so it accumulates on the glow plug.
3. Electrical Connection Problems
A good electrical connection is essential for the proper functioning of DAIHATSU glow plugs. If there's a loose or corroded connection, the glow plug might not receive the right amount of power.
Loose connections can happen due to vibrations in the engine. Over time, the constant shaking can cause the wires to come loose. Corrosion, on the other hand, is usually caused by moisture. If there's water or humidity in the engine compartment, it can react with the metal parts of the electrical connection, forming a layer of corrosion.
When the electrical connection is poor, the glow plug might not heat up at all or might heat up inconsistently. This can lead to hard starting, rough idling, and even misfires in the engine.
4. Manufacturing Defects
Sometimes, the problem with DAIHATSU glow plugs can be due to manufacturing defects. Even though manufacturers have quality control measures in place, there's always a small chance that a defective glow plug makes it out of the factory.
A manufacturing defect could be something as simple as a weak spot in the heating element. This weak spot can cause the glow plug to fail prematurely. Another possible defect could be an issue with the insulation. If the insulation is not done properly, it can lead to electrical shorts and overheating.
If you suspect a manufacturing defect, it's important to get the glow plug replaced as soon as possible. Using a defective glow plug can not only cause starting problems but can also damage other parts of the engine.
5. Wear and Tear
Just like any other part, DAIHATSU glow plugs have a limited lifespan. With regular use, the heating element inside the glow plug will gradually wear out. This is a natural process, but the rate of wear can be affected by several factors.


If the engine is used in harsh conditions, such as extreme temperatures or high - load operations, the glow plug will wear out faster. Also, frequent starting and stopping of the engine can put more stress on the glow plug, reducing its lifespan.
As the glow plug wears out, its heating efficiency will decrease. Eventually, it won't be able to heat the combustion chamber enough, and the engine will have trouble starting.
How to Deal with These Failures
If you're experiencing problems with your DAIHATSU glow plugs, there are a few things you can do. First, you can test the glow plugs to see if they're working properly. You can use a multimeter to check the resistance of the glow plug. If the resistance is outside the normal range, it's likely that the glow plug is faulty.
If you find a faulty glow plug, you'll need to replace it. We offer a wide range of high - quality DAIHATSU glow plugs, such as the Glow Plug for Ikomatsu Caterpillar Pk - 96 6110 - 13 - 2511 100mm 22.5v, Glow Plug for Daihatsu Pd - 191 19850 - 87702 101mm 11v, and Glow Plug for Daihatsu Pd - 190 19850 - 87701 101mm 7v. These glow plugs are designed to meet the high standards of DAIHATSU engines and will ensure smooth starting and reliable performance.
To prevent future failures, you can take some preventive measures. Use high - quality diesel fuel to reduce carbon deposits. Keep the engine compartment clean and dry to prevent corrosion of the electrical connections. And make sure to follow the manufacturer's recommended maintenance schedule.
If you're in the market for DAIHATSU glow plugs or have any questions about the common failures we've discussed, don't hesitate to reach out. We're here to help you find the right glow plugs for your needs and ensure that your DAIHATSU engine runs smoothly.
References
- Diesel Engine Handbook, Various Authors
- Automotive Electrical Systems Manual, Industry Experts






